is located on the right side of the thresher, with the aid of the bottom head is connected to a grain auger, while using the top - with inclined grain auger. Countershaft mounted thereon, from which a single chain loop rotation is transmitted to the bevel gear oblique grain auger and the upper shaft sprocket. After working branch scraper chain elevator varschenie transmitted to the sprocket shaft grain auger.
shaft rotation counter grains. elevator belt transmission is performed from the master counter from the right side of the thresher. On the counter shaft mounted pulley slip clutch, regulated torque transmission 10kgs / m. P>
is located on the left side of the thresher. The upper shaft pulley mounted Return elevator overload coupling as well as the asterisk. Upper Return elevator shaft receives rotation from a rear counter and from there goes PTO Kolosov through screw conveyor chain and chain drive to the auger distributor finish threshing device. The guard yamufta adjusted torque transmission 10kgs / m.
In the grain elevators and Kolosov applied standardized clutches, which differ only in the pulleys.
arise during operation scheliv zone of abutment of the upper and lower lids of elevators and the zone of connection to the loading hopper auger housing should be sealed with sealant. p>
If it is not found in the needed parts catalog, the Motor-Agro experts as soon as possible ready to make it in the required amount according to your drawings.
For more information and orders please call directly to the engineering department:
+38 057 714 64 98