There are 12 products.

stacker Harvester DON

Required when collecting straw and chaff, forming stacks and its discharge. The camera includes two side walls, the bottom with your fingers, unloading valve and bars. Stacker completed solomonabivatelem - and polovonabivatelem filling chamber for discharging stacks - safety-device control dischargeable and fur-zmom valve forced closure.
solomonabivatelya rake teeth with the rotation of the crankshaft are moving on a trajectory in the form of an elliptic curve, capturing straw walker with key and send it to the camera. Podpressovochnaya camera output is reduced to its parts and the straw is compressed in this state. It resets the camera. Cantilever beams combs do not allow to grow.

Polovonabivatel

As solomonabivatel is feeding chaff and sboiny in the front part, because of this sexual and sboina not mixed with straw. To reset the air filled in the stacker provided hatches.
degree straw pressing chamber limit max. rot. point, which is adjusted slip clutch mounted on the drive shaft. With overflow stacker triggered switching off the drive coupling. With filling straw stacker sensor deviates back and reaching the upper point activates elektrozolotnik gidroraspredelit. so that the oil from the farm can be fed into the GC. When the lever through the thrust lever and removes the latch rod, the retaining flap and a bottom, and includes fur-gp unloading stacks. Bottom and rotated by means of traction opens the valve. Thumbs down on the field, straw stubble engages with fingers are removed from the stacks, thus leave mop (during unloading stacks harvester is in motion). Sensor descends from the top of stacks and includes hydraulic cylinders, and a bottom return valve in the closed position. Basically, the sensor is used for discharging the first ryadya stacks.
Adjustments stacker follows. Rotating screed make the gap between the trailing edge and the leading edge of the tray bottoms obtained within 10-40 mm. During the spring tension, you need to follow to its length in the closed condition of the bottom does not exceed 630 mm. Hook latch must be free to enter the rear of the valve hook. For this purpose and regulated rod length.
moving plate straw discharge gap between shields and keys and tooth between the flap and the tine receives a value from 5 to 10 mm).
volume changes position staples stacks of electromagnets sensor alarm filling stacker. During cleanups wet grain weight Adjust with weeds, and the bracket is attached soot. minimum volume stacks, and in the case of cleaning with normal humidity loaves soot. the maximum amount of stacks).

Showing 1 - 12 of 12 items

We call you back

MOTOR-AGRO recommends

Parts manufacturing facilities for tractors and combines on your drawings!

If it is not found in the needed parts catalog, the Motor-Agro experts as soon as possible ready to make it in the required amount according to your drawings.

For more information and orders please call directly to the engineering department:
+38 057 714 64 98