Inserts crankshafts

Inserts crankshafts

This is a half-ring made of metal which is slightly softer than that used for the production of the crankshaft and has a n anti-friction coating. During continuous operation it inserts the first fail and not the neck.

Destination

At its core is a plain bearings for the rods which rotate the crankshaft acting on it microburst energy in the engine combustion chambers .

this with-me great speed and load speed are great hosts in this regard is the need for a sharp decrease in the friction parts, otherwise the engine to fail. In order to reduce friction forces all mating parts of the engine comprise a "mist", being micron thin film produced using the spec. with-us lubrication.

Forms

Connecting rod inserts as previously mentioned, are located in the space between the connecting rods, crankshaft and journals, and the root perform a similar role, but installed between the crankshaft and the place where the crankshaft passes through the motor housing.

each engine inserts its size. Diameter of repair liners differs from the diameter of 0.25 mm novyhs step. This and formiretsya range of inserts each subsequent larger in diameter than preduduschy a given step.

We call you back

MOTOR-AGRO recommends

Parts manufacturing facilities for tractors and combines on your drawings!

If it is not found in the needed parts catalog, the Motor-Agro experts as soon as possible ready to make it in the required amount according to your drawings.

For more information and orders please call directly to the engineering department:
+38 057 714 64 98