There are 27 products.

Tape brake (friction)

is executed in the form of strips made of asbestos and others. Comp. which are resistant to high temperature. Used in brake and friction. nodes with dry friction, which need a large thermal and wear resistance. Operable pressures up to 12 MPa and temperature of friction to + 300 ° Celsius.

LTA

This strip of woven asbestos, which is reinforced with a wire of brass with an oil impregnation according to GOST 1198-93. Are used as lining in Torm. and frictions. nodes provided dry friction material.
produced sequences. 4-12 mm, a width of 13-200 mm.

EM-1 (elastic material)

This rolled unsanded Brk. black ribbon in accordance with GOST 15960-96. Used in Torm. frictions. nodes provided dry friction.
produced sequences. . 5-12 mm, a width of 40-160 mm
Works when - allowable working pressure in the range of 1.5-2.5 MPa, and max. a friction surface temperature of 200 ° C.
Rolled tape material has an increased elasticity for functioning mechanisms with different curvature radius of the surface. friction. Thus keeping their properties in different types of climate.

EM-K

unpolished brake band with brass shavings red (analog EM-2 in accordance with GOST 15960-96). Used in Torm. and frictions. nodes at uslvoii dry friction.
Produce thick. 5-10mm and a length up to 8 meters
Works when - working pressure in the range 1.5-2.5 MPa max. friction to 200 ° C.
Distinctive features referred increased elasticity with extended features. Use in Torm. Device islands with different radii of surface curvature. friction.

Showing 1 - 27 of 27 items

We call you back

MOTOR-AGRO recommends

Parts manufacturing facilities for tractors and combines on your drawings!

If it is not found in the needed parts catalog, the Motor-Agro experts as soon as possible ready to make it in the required amount according to your drawings.

For more information and orders please call directly to the engineering department:
+38 057 714 64 98