There are 18 products.
Showing 1 - 18 of 18 items
Hinged rear equipment

Attachments rear tractor T-40

The back of the tractor T-40 is needed to connect the mounted semi-mounted machines, different ext. equipment, and thus ensuring their correct transport and working positions. Rear linkage is a hinge mechanism having a center and a pair of longitudinal rods. Brace longitudinal traction Port. the levers are located on the shaft, which is also worth a crank connected to the hydraulic cylinder.

The equipment is lowered and lifted by a hydraulic cylinder, and its correct position is achieved by adjusting the top link with braces. Attachments sealed with ball joints facing the rear of the pair of lower longitudinal rods and the central rod. The front ends of the longitudinal rod is pivotally secured to an axis passing through the holes the transmission case.

Front hinge rod is mounted on the central bolt in the bracket. Via longitudinal bracing rods attached to the levers, the cat-s planted in slots in the rotary shaft. At the longer end of the shaft splined left crank is also located, which is connected with fork g / q rod. The second end of the hydraulic cylinder Port. with bracket. The shaft of the lift arms can be scrolled within the bushings mounted in the bore of the bracket.

The principle of operation of attachments

When the rod out of the cylinder it rotates the shaft and levers acting on the struts that lift the longitudinal rod linkage and equipment to them. On the reverse go down rod equipment.

There is a possibility of connecting the lower fork brace and longitudinal rods with a bolt that is placed in the slot or plug the hole. The plug is placed into the slot only when the tractor is attached guns widely capture kotrye equipped with support wheels. In this case, the unit can copy the topography of the field throughout the working width. In other cases, the lower fork brace bolted to longitudinal thrust.

In order to limit lateral displacement to / x in the conveying equipment works execution periods or using traction lock. Traction allow adjustment of the length and hooked at one end to the longitudinal tie rods, and on the other by locking brackets.

We call you back

MOTOR-AGRO recommends

Parts manufacturing facilities for tractors and combines on your drawings!

If it is not found in the needed parts catalog, the Motor-Agro experts as soon as possible ready to make it in the required amount according to your drawings.

For more information and orders please call directly to the engineering department:
+38 057 714 64 98