There are 8 products.

Coupling

On these vehicles give dry clutch and a single disc spring and hub vibration damper. The leading part of coupling includes a flywheel, clutch master kootory drive includes a housing, pressure plate and levers are turned off. clutch.

apparatus

Stamped steel casing is connected to the flywheel with six bolts, to the cat's head and between the thread is cylindrical. band required for centering the casing.

For a better cooling of coupling the flange and the side surface. the housing adjacent the cut is 3, through the cat-s work is done when the air circulation. The side of the casing 3 there are evenly spaced. rectangular windows, in the cat-s consists of 3 tabs iron pressure plate.

This Port. It transmits torque through the casing on the pressure plate; pressure plate alignment attributes. housing and suggests the possibility of axial displacements of the pressure plate carries. flywheel when the clutch is disconnected.

9 has pairs of compression springs between the pressure plate and casing. In order to avoid jamming during compression of the outside and inside. springs are made with different voltage. winding. Internal springs are centered with respect to the bosses on the pressure plate and the clutch casing collars, the outer relative to the inner springs. To protect the pressure springs against the harmful effects of heat which is released during the clutch slip, between the pressure plate springs and are arranged heat insulating. asbokartonovye goals.

3 steel arm off. coupling slots are in the example. projections and pressure plate by means of needle bearings and axles are combined with the pressure plate and the support forks hinged on the casing.

on the threads. shank support forks nakrucheny spherical nut cat-s are pressed against the spherical. conical surfaces on the shell. springs, located between the support and the casing vilkok. Such swivel conn. enables nekot th swing support forks, you need to compensate for the change of the radial distance between the axes of the arms during removal of the pressure plate.

Spherical nuts still in need of installation. all Power Off levers. in one plane, forming a uniform gap between the ends of the levers and the end of the bearing Power Off. clutch. Unequal gap entails bias the pressure plate while when switched off. Clutch - incomplete switched off. or non-fluent inclusion. To avoid samootvertyvaniya spherical. nuts at work, their raskernyayut in the slot on the thread. liners bearing forks.

Showing 1 - 8 of 8 items

We call you back

MOTOR-AGRO recommends

Parts manufacturing facilities for tractors and combines on your drawings!

If it is not found in the needed parts catalog, the Motor-Agro experts as soon as possible ready to make it in the required amount according to your drawings.

For more information and orders please call directly to the engineering department:
+38 057 714 64 98