Tractors T-70 staffed almost entirely manual transmission. Transmission is represented by nine steps and two ranges, as well as a reduction gear. Number of gears is eighteen forward and four back. There is also an opportunity to establish creeper. P>
However, there are also tractor modifications issued after 1985 with an installed hydrocontrolled transmission and switching are already under stress. This box allows you to choose one of four programs in the framework of the four speed ranges with it without turning off the clutch itself. P>
Primary shaft and secondary shaft are located in a box, or rather in its housing on a single axis. An intermediate shaft coupled with the first transmission shaft, and the reverse gear are arranged in parallel primary and secondary shafts. The primary shaft is fixed by means of two bearings, one of which is mounted in a glass gearbox housing, a second bearing and the input shaft connected to the output shaft in the forward ends of the latter. P>
On the back Vome is independent and synchronous drives. Independent drive is transmitted from the engine crankshaft two-speed gearbox, disposed in the clutch housing, and providing two-speed rotational mode. P>
If it is not found in the needed parts catalog, the Motor-Agro experts as soon as possible ready to make it in the required amount according to your drawings.
For more information and orders please call directly to the engineering department:
+38 057 714 64 98