Your cart
There are no more items in your cart
- Directories and catalogs
- 1 likes
- 3344 views
| Bearing Fitting Position | Bearing designation | bearing Type | Number |
| shaft PTO | 704 702 K2 | Needle groove Single row without inner ring and cage | 8 |
| Val propeller (intermediate support) | 180 206 C17 | Ball radial single-row with double-sided seal | 1 |
| Fan | 80203 AS9 | Ball groove Single row with two shields | 2 |
| door lateral (upper roller) | 6-1000098 | Single row radial ball | 1 |
| lateral door (middle and lower mechanism) | 80029 C1 | Ball groove Single row with two shields | 2 |
| Engine ZMZ-4025, ZMZ-4026 ( pump water) | 6-330902 ES17 | radial ball dv uhryadny with bilateral seal With a roller instead of the inner ring | 1 |
| Engine ZMZ-4025, ZMZ-4026 (water pump) | 6-1NR16115 EC30 | Double-row radial ball with a roller instead of the inner ring | 1 |
| ZMZ-Engine 4061, ZMZ-4063 ( pump water) | 6-5NR17124 ES23 | Special | 1 |
| The engine ZMZ-4025, ZMZ -4026 (tension roller, the rear support) | 20 703 A1 | Single row radial ball with a one-way seal | 1 |
| Engine ZMZ-4025, ZMZ-4026 (a tension roller, the front support) | 203 A | Ball groove single-row | 1 |
| Transmission (shaft secondary) | 664 707 E | Needle-row without rings, cage with rollers | 3 |
| Transmission (shaft secondary) | 3KK 42h47h30 E | Radial needle roller bearings, double-row without rings | 2 |
| Transmission ( a secondary shaft, the rear support) | 50706 GW1 | Ball groove single-row groove on the outer ring | 1 |
| Transmission (primary shaft, the rear support) | V6-50307 CABG | Single row radial ball groove on the outer ring | 1 |
| Transmission (shaft primary, front support) | 80203 AS9 | Ball groove Single row with two shields | 1 |
| Transmission (intermediate shaft) | V6-50305 A1E | Single row radial ball groove on the outer ring | 2 |
| rear axle (drive gear, the rear support) | 6-27607 ASH2 | Single row tapered roller with increased weight large cone angle | 1 |
| rear axle (pinion gear, the front support) | 6-27606 ASH2 | Single row tapered roller increased load capacity with a large cone angle | 1 |
| rear axle (Differential) | 6U-7510 AL | Roller cone Single row of increased weight | 2 |
| Steering | 108 905 in | thrust ball bearings single in the casing | 2 |
| steering | 804,704 K5 | Needle groove Single row without inner ring and cage | 8 |
| steering | 904 700 K | Needle groove Single row without inner ring and cage | 10 |
| steering | 916 904 E | Joint Angular opening of a special | 2 |
| steering | 6-1000805 A | Ball radial single-row | 2 |
| The hubs of the rear wheels (internal support) | 6U-7510 ASH | Single row tapered roller increased weight | 2 |
| wheel rear wheels (outer bearing) | 6-7509 A | Single row tapered roller higher constant duty | 2 |
| The hubs of the front wheels (the internal support) | 7307 A | Roller cone Single row high-load | 2 |
| the front wheel hub (external support) | 6-7305 AL | Roller Single row tapered increased weight | 2 |
| Coupling | 6-360710 US23 | Single row radial ball | 1 |
| Clutch | 360 710 US9 | Ball radial single-row | 1 |