Bearings DON-1500 by Motor-Agro

Bearing Fitting Position	Bearing designation	bearing Type	Number
Final Drive	215	Ball radial single-row	4
Final Drive	7513	tapered roller single-row	2
Final Drive	7519	tapered roller single-row	2
Final Drive	12507	Roller radial short cylindrical roller	2
Final drive	42211 CM	Roller radial short cylindrical rollers with single-breasted inner ring	2
Final Drive	664 913 E	The needle-row without rings with roller separator	6
Val drum	11314	Ball radial spherical dd uhryadny with adapter sleeve	2
Val bitters	11314	Ball Spherical double row with adapter sleeve	2
Val drive reel countershaft reel tensioning sprocket reaper tensioning sprocket feeder shaft inlet, tensioning sprocket threshing tensioners	180204	Ball radial single-row with double-sided seal	33
gear shaft filling auger	60206	Ball groove single row with one side plate	2
Lead crankshaft, a driven crankshaft	RSM10.01.38.160	Spetspodshipnik	10
Upper shaft feeder, rear countershaft	11210 R1	Ball radial spherical double-row with the adapter sleeve	4
Upper pulley variator reel countershaft spacer lever purification , tension roller baffle bitters, fan countershaft, a tension roller surround hydrodrive	180 206 C17	Ball groove Single row with double-sided seal	12
Unloading inclined auger	580,306 COP17	Ball groove Single row with two seals with a spherical outer surface of the outer ring	1
drum hydraulic cylinder, variable stroke	180500	Ball radial single-row with double-sided seal	2
Cylinder variator reel	6027	Ball Angular Single row detachable removable outer ring with a contact angle α = 12º	1
Cylinder variator reel	60027	Ball groove single row with one side plate	1
counter feeder, spacer countershaft	180 207 C17	Single row radial ball with bilateral seal	3
speed ranges wheel	407	Ball groove single-row	5
speed ranges wheel, clutch	309 K	Ball groove single-row	1
rocker tine	SH25 E	hinge without holes and grooves for the lubricant	8
rocker polovonabiratelya	SH25 E	hinge without holes and grooves for the lubricant	2
The left housing solomonabivatelya	NC-758332	Roller needle with an outer ring with a through hole without a separator	1
Reversing mechanism feeder	80212	Ball groove Single row with two shields	1
mechanism balancing header	942/40	needle roller with an outer ring with a through hole without a separator	4
Bridge driven wheels	7610 A	The roller cone of dnoryadny high-load	2
Most of the steered wheels	7613 K1	tapered roller single-row	2
Inclined cereal auger hopper	1680204 C17	Ball groove Single row with two side plates with wide inner ring the spherical outer surface of the outer ring on the adapter sleeve	1
Natyazhnik	180205 C17	Ball groove Single row with double-sided seal	2
Lower roller conveyor	580 204 COP17	Ball radial single-row with two seals with a spherical outer surface of the outer ring	2
Lower pulley variator reel countershaft fan	180,508 K2S17	Ball groove Single row with double-sided seal	4
axis rails feeder	SH20 E	Joint without holes and grooves for the lubricant	2
Polovonabivatel, grain elevator, a screw hopper unloading inclined auger Return elevator, countershaft group finish threshing device	1680206 C17	Ball groove Single row with two side plates with wide inner ring of the spherical outer surface of the outer ring on the adapter sleeve	13
Right housing solomonabivatelya	NC-758332	Roller needle with an outer ring with a through hole without a separator	1
Drive unloading auger, countershaft compressor	180306 COP9	Ball groove Single row with double-sided seal	2
Drive horizontal hopper auger	1580207 K1S17	Ball groove Single row with two seals with a spherical outer surface of the outer ring	1
cutter knife drive	7510	Single row tapered roller	2
cutter knife drive	102307 M	Roller radial short cylindrical roller bezbortnym outer ring and two locking washers	1
cutter knife drive	102605	Roller radial short cylindrical roller with bezbortnym outer ring and two locking washers	1
cutter knife drive	180610	Ball radial single-row with double-sided seal	2
cutter knife drive	943/45	needle Roller with an outer ring with a through hole without a separator	2
purification Drive	2180120 COP17	Ball groove Single row with double-sided seal	2
purification Drive, finish threshing device left the tine arms, the right tine arms, the fan shaft, a leading crankshaft shaker, a driven crankshaft Sol Shake, bitter spacer screw header	1680207 C17	Ball groove Single row with two side plates with wide inner ring of the spherical outer surface of the outer ring on the adapter sleeve	2
knife drive	942/25	needle roller bearings with an outer ring with a through hole without a separator	2
Reversible drive screw header	307	Ball groove single-row	3
Reducer filling auger	306 R3	Ball groove single-row	2
Reducer clutch, a reversing drive screw reaper speed range box	211	Ball groove single-row	3
cabin seat	8102	Thrust ball single	1
cabin seat	941/25	needle roller with an outer ring with a through hole without a separator
Coupling	180 707 C17	Ball groove Single row with double-sided seal	1
Setting the pump	180 212	Ball radial single-row with double-sided seal	2
Central hinge	1580211	Ball groove Single row with two seals with a spherical outer surface of the outer ring	1
hinge cylinder steered wheels of the bridge, the hinge rod axle steerable wheels	SHS20	articulated with holes and grooves for the lubrication in the inner ring	6
Hinges propshaft	804 704 R3	Needle groove Single row without inner ring and cage	8
Screw finish threshing device	1680204 C17	Ball groove Single row with two side plates with wide inner ring of the spherical outer surface of the outer ring s on akrepitelnoy sleeve	1
The auger header, Kolosova auger Grain auger bitter spacer screw finish threshing device	1680205 C17	Single row radial ball with two side plates with wide inner ring of the spherical outer surface of the outer ring on the adapter sleeve	11