Your cart
There are no more items in your cart
- Directories and catalogs
- 3 likes
- 3131 views
| Bearing Fitting Position | Bearing designation | bearing Type | Number |
| shaft PTO | 6-114 A | Single row radial ball | 1 |
| Val propeller | 804704 K3S10 | Single row without a needle groove of the inner ring and cage | 12 |
| generator | 6-180502 K1S9 | Ball groove Single row with double-sided seal | 1 |
| generator | 180603 COP9 | Ball groove Single row with double-sided seal | 1 |
| Engine (water pump, the rear support) | 20 703 A1 | Ball groove single-row one-way seal | 1 |
| Engine (water pump, the front support) | 20803 AK1U | Single row deep groove ball one-way seal | 1 |
| Engine (tensioning fan roller, the rear support) | 20 703 A1 | Ball groove single-row one-way seal | 1 |
| motor (throttle axis) | 942/8 | needle roller with an outer ring with a through hole without a separator | 2 |
| Engine (cooling system, a tension roller) | 203 A | ball groove single-row | 1 |
| Engine (filter centrifugal cleaning oil) | 8102 | Thrust ball single | 1 |
| Transmission (shaft leading, front support) | 60203 A | Ball radial single-row with one side plate | 1 |
| Transmission (shaft secondary) | 50 307 A1 | Ball groove Single row with a groove on the outer ring | 1 |
| Transmission (shaft primary) | 50209 A2 | Single row deep groove ball groove the outer ring | 1 |
| Transmission (shaft in between, the rear support block of gear wheels) | 50 307 A1 | Ball groove single-row groove on the outer ring | 1 |
| Transmission (shaft intermediate, front support block of gear wheels) | 60-42207 CM | Roller radial short cylindrical rollers with single-breasted inner ring | 1 |
| rear axle (differential) | U-807 813 A | Roller angular contact tapered single-row | 2 |
| rear axle (gearbox, gear leading) | 20-102605 M | Roller groove single-row | 1 |
| rear axle (driving gear main pair, the rear support) | 27709 U1 | Roller cone Single row with a large cone angle | 1 |
| rear axle (driving gear of the main pair, front support) | 27308 CRA | Single row tapered roller with a large angle con mustache | 1 |
| steering | 636 905 | Ball angular contact Single row stamped | 1 |
| steering | 977 908 K | Roller Angular conical without inner ring | 1 |
| steering | 987 910 K | Roller Angular conical without inner ring | 1 |
| Steering (shaft fry) | 922 205 K | roller groove Single row without inner ring | 1 |
| The hubs of the rear wheels (internal support) | 6-7515 A | Single row tapered roller high-load | 2 |
| The hubs of the rear wheels (external support) | U-807 813 A | Roller angular contact tapered single-row | 2 |
| the front wheel hub (internal support) | 7609 KU | tapered roller single-row | 2 |
| the front wheel hub (Mr. aruzhnaya support) | 7606 KU | tapered roller single-row | 2 |
| Clutch | 588 911 | single ball bearings in the housing | 1 |