Your cart
There are no more items in your cart
- Directories and catalogs
- 2 likes
- 3441 views
Bearing Fitting Position | Bearing designation | bearing Type | Number |
shaft PTO | 704 702 K2 | Needle groove Single row without inner ring and cage | 8 |
Fan | 180503 K1S9 | Single row radial ball with bilateral seal | 2 |
generator | 6-180502 | Single row radial ball with bilateral seal | 1 |
generator | 6-180603 | The ball radial single-row with double-sided seal | 1 |
Jack | 8103 | Thrust ball single | 1 |
Transmission | 6-50706 U | Single row deep groove ball groove on the outer ring | 2 |
Transmission | A 60203 | Mr. Ball dially Single row with one side plate | 1 |
Rear axle | 6-308 VIII | Ball groove single-row | 2 |
rear axle | 6U-7510 U2SH | tapered roller single-row | 2 |
rear axle (pinion gear) | 6-7606 K1SH | Single row tapered roller | 1 |
rear axle (pinion gear) | 6-7607 AU1SH | Single row tapered roller high-load | 1 |
pump water | 20703 K | Ball radial single-row one-way seal | 1 |
pump water | 20803 CG | Ball groove single-row one-way seal | 1 |
Stub (pin) | 108804 | Ball abutment single | 2 |
Stub (pin) | 943/20 | needle roller with an outer ring with a through hole without separator | 4 |
Steering (shaft fry) | 922 205 K | Roller groove Single row without the inner ring | 1 |
Steering (column) | 636905 | Ball Angular Single row stamped | 2 |
Steering (worm) | 877907 | Roller Angular conical without inner ring | 1 |
Steering (worm) | 977 907 K1 | Roller angular contact tapered without internal ring | 1 |
The hubs of the front wheels (the internal support) | 6-7806 A | Roller cone single-row high-load | 2 |
the front wheel hub (external support) | 6-7305 AL | single-row tapered roller high-load | 2 |
coupling (clutch off) | 6-360710 US9 | Single row deep groove ball | 1 |