Your cart
There are no more items in your cart
Old name: Neste City Pro C4 5W-30
Neste Pro C4 5W-30 - Fully synthetic engine oil meets the requirements:
ACEA C4
MB 229.31
OFFICIAL APPROVALS OF EQUIPMENT MANUFACTURERS
MB-Approval 226.51
Renault RN0720
DESCRIPTION
Neste Pro C4 5W-30 oil is specially developed for Nissan cars in accordance with Euro5 emissions standards, as well as for Renault and Suzuki cars that use diesel particulate filters and exhaust gas reprocessing devices that require the use of ASEAN C4 oil .
CHARACTERISTICS AND ADVANTAGES
- Excellent start at low temperatures
- Helps to save fuel
- Reduced emission
TYPICAL INDICATORS
Viscosity (CCS) −35 °C 5900
Density at 15 °C 851 kg/m³ ASTM D4052
Flash Point (COC) 230°C ASTM D92
Solidification temperature −42 °C ASTM D5949
Sulfated ash <0.5 w/w % ASTM D874
Total Base Number (TBN) 8.1 mg KOH/g ASTM D2896
Viscosity at 100 °C 12.2 cSt ASTM D445
Viscosity 40 °C 73 cSt ASTM D445
Viscosity index 165 ASTM D2270
APPLICATION
The operation of the filter (DPF) requires the use of Low SAPS oil, with a low content of sulfated ash, sulfur and phosphorus.
Check the suitability of the oil in the car's owner's manual or at the importer's representative.
Neste Pro C4 5W-30 - Fully synthetic engine oil meets the requirements:
ACEA C4
MB 229.31
OFFICIAL APPROVALS OF EQUIPMENT MANUFACTURERS
MB-Approval 226.51
Renault RN0720
DESCRIPTION
Neste Pro C4 5W-30 oil is specially developed for Nissan cars in accordance with Euro5 emissions standards, as well as for Renault and Suzuki cars that use diesel particulate filters and exhaust gas reprocessing devices that require the use of ASEAN C4 oil .
CHARACTERISTICS AND ADVANTAGES
- Excellent start at low temperatures
- Helps to save fuel
- Reduced emission
TYPICAL INDICATORS
Viscosity (CCS) −35 °C 5900
Density at 15 °C 851 kg/m³ ASTM D4052
Flash Point (COC) 230°C ASTM D92
Solidification temperature −42 °C ASTM D5949
Sulfated ash <0.5 w/w % ASTM D874
Total Base Number (TBN) 8.1 mg KOH/g ASTM D2896
Viscosity at 100 °C 12.2 cSt ASTM D445
Viscosity 40 °C 73 cSt ASTM D445
Viscosity index 165 ASTM D2270
APPLICATION
The operation of the filter (DPF) requires the use of Low SAPS oil, with a low content of sulfated ash, sulfur and phosphorus.
Check the suitability of the oil in the car's owner's manual or at the importer's representative.