replacements steering system (EN) and a power take-off shaft (PTO)
Shafts plugs, bushings, nuts, cameras, valves, speakers, housings, valves, spider, couplings, pumps, fingers, pallets, pistons, valves, gears, pitman arm, blocks, ropes, rods, filters, shafts, washers, hinges, gears...
Replacements for steering and PTO of the tractor models of T-150, T-151K, T-156
Rotation tractor is performed using the "crease" tractor frame about a vertical pivot two cylinders steering rotation by an angle equal to thirty degrees in either direction from the reference position. Hydromechanical system steering tractors T-150, T-151, T-156 includes:
- worm steering mechanism with a shutoff valve and control valve, which provide a proportional rotation of a steering wheel oil supply to the corresponding cavities of hydraulic cylinders, as well as lock cylinders during driver inaction;
- feed-section pinion hydraulic pump drive which constantly inserted directly from a diesel engine;
- flow valve which supplies a constant amount of oil to distributor is directly dependent on the rotational speed of the crankshaft of a diesel engine;
- filters hydraulic tank, the suction and discharge Hepa removable paper filter elements;
- feedback rod with the pivot arm, rear frame and bipod which provides tracking of proportionality rotation.
PTO gearbox with independent drive is located on the rear section. Drive thereto is performed by means of the driveline. In itself, the inclusion of the drive PTO, as well as management gidropodzhimnoy PTO clutch gearbox comes with a lever on the driver's seat.