Parts for plows tillage equipment
shoes, plow shafts, screws, chest, board, support wheels, plow body, wings blade, Plowshares, pads on the rack, piles, supporting the blade, skimmers, struts, strut, Skimmers, extension racks plow...
Spare parts for plow PLN-8-35
The plow is needed for plowing the soil for grain and technical cultures to a depth of 30 cm, provided that the soil is not littered with stones, fieldstone and other obstacles having a resistivity in the range of up to 0.09 MPa (0.9 kg/cm2), hardness of the soil to about 3.0 MPa (30 kg/cm2) and the soil humidity about 12-15%.
Plow used when working in zones 1-9, 11-14, 16, 17-19. To maintain the desired operating parameters, such as processing speed and working depth that enforce agronomic requirements, the plow can be reformatted into 8-mikorpusny hinged. This procedure was carried out using the method of weaning the last body.
Workflow tillage plows PLN
There is a trail. way: Coulter uglosnim undercuts or topsoil to depth of about 12 cm, and then carries out its revolution, and after laying this on the bottom of the furrow. Laid layer hiding the rising reservoir and the main body turns as a result - is obtained deep incorporation of weeds and crop residues.