Bunker

Parts for bunker harvester DON-1500

The shafts, sleeves, neck, stars, shells, casings, impellers, shafts, bearings, gearboxes, glasses, hubs, spheres, gears, pulleys, screws. ..


ᐉ Bunker from Motor-Agro

Spare parts for silo harvester DON-1500

The bunker is necessary to collect threshing grain for further discharging it into the vehicle. The hopper includes: a housing with an unloading device with the mechanism on and dampers horizontal screw augers, sample catcher hydraulically unloading auger drive and a pivotally-hinged cover with a biasing mechanism. The hopper is equipped with ceiling lighting, alarm filling flashlight lantern bracket, front and side shields fencing. On the right and rear walls of the hopper there is an observation window to monitor the filling of the silo. Unloading device includes horizontal and sloping unloading auger, coupled with a special nozzle avtoperekrytiem output window.

Once you include it if the crankshaft rotates at a low frequency and eventually the frequency can be increased to the maximum. Vibrators include only after the unloading auger. Augers need to spread the grain around the hopper volume. The screw is located at the top and includes a housing and a screw position with intermittent turns. Using a belt transmission shaft kontrprivodnogo activated auger itself.

hopper lid gives greater fullness and grain hopper elements prevent grain elevators overload on the moments refilling hoppers. To this end, the hopper lid is made as a hinged-hinged with biasing mechanism. The flaps cover secured to the hopper body by means of hinges, and the free hand unit are connected with screw springs fur-zmom adjustment. The side walls do not give to wake up at a grain silo filling.

At the time of filling of the silo augers send grain on its axis on both sides and the top of the bunker. the hopper lid on which there is a block of springs does not give grain to climb up thus creating the conditions for filling the full volume at the same time pushing the Cover folds reducing this burden to the elevator. Screw mechanism control force of the spring assembly.

sample catcher arching need for removing and increasing the speed of unloading of wet grain and others. Cultures. With this tsenlyu vibratory hopper is equipped with.

Filter by

Manufacturers

more... less

Price

грн грн
Filter
Contacts in Ukraine

Ukraine, Kharkiv, Autogenna, 12a

from 830 to 1700 GMT+3

sbyt@motor-agro.com.ua

+38 050 300 00 19

+38 067 572 17 11

+38 057 714 65 14

Мотор-Агро Viber Contact Мотор-Агро Viber Contact


Didn't find the necessary spare part for your tractor, combine harvester, special machinery or equipment?

Just call MOTOR-AGRO specialists at the numbers listed on this site - we will help

Product added to compare.