Thresher
Replacements for the thresher to combine DON-1500
beater Liner, pests, bolts, shafts, wheels, sprockets, stonetrap rings variator, cones, lids, housings, couplings, concave, springs, grilles, rollers, hubs, pulleys, splines, keyways materials...

Parts thresher Combine DON-1500
Includes case and side panels mounted therein beater threshing drum, beater, concave to the adjustment mechanism and the straw walker, located on the side panels and the mouth. where the knowledge and drive shafts, built-in sieve cleaning and CVT with automatic belt tension depending on the load generated. It is key shaker set at an angle to vetroreshetnoy cleaning, thereby reducing loss of grain from straw gathering keys. However, there is a strong straw cutaways with pom the harvest of straw crops low humidity. threshing drum and a large angle of FPIC keys. increased number of vanishing both grain and small of straw particles on vetroreshetnuyu purification overloading these it and increasing the flow of grain gathering with vetroreshetnoy purification.
Reduced losses thresher
Reduced losses of grain for threshing produced by changing the angle of the keys depends on the shaker and Comp. harvested crops, thereby increasing flexibility and Univers. Grind DON-1500. The threshing drum 10 is present right and left pests eg. reefs. A concave-section, reversible welded construction, an angle of 130 degrees. It is possible to lower the drum shutter deck (100 mm) with an instantaneous relief mechanism which prevents clogging and facilitates cleaning drums.