Axle front and rear axle ZIL

Spare parts for front and rear axles ZIL

Bolts shaft, Cardan shafts, bushings a half-hub nut, axle housing, bearing support, a pair of gears, half-axis of the bridge, gaskets, gears, seals, hub flanges , gears, pins...


ᐉ Axle front and rear axle ZIL from Motor-Agro

Spare parts for bridges for ZIL

Rear axle ZIL-130

On the rear axle of the truck mounted double main gear, the torque is transmitted through 2 pairs of gears - bevel and cylindrical . Bevel gear is made with the shaft and allows the rotation of the driven bevel gear fixed to the flange of the intermediate shaft. Small cylindrical gear is made with the intermediate shaft and drives a large cylindrical gear which is fixed to the differential box and it turns bearing bores of the rear axle housing. Torque from large cylindrical gears through the differential axis and transmitted to the driving wheels. Differential - conical with 4 satellites. Includes 2 detachable cups, crosses with the satellites, which are in engagement with

Semiaxis side gears arranged in slots axis. Manufactured unloaded type, with outer flanges at the ends, which pins are attached hub of the drive wheels. The hub axle housing stands on a 2-tapered roller bearings. Cuffs do not allow the lubricant to flow from the hub. crankcase ventilation breather implemented. For the purpose of draining/refilling oil sump holes are provided that cover the screw plugs.

Front axle ZIL-130

Includes beam and pivot pins. At the ends of the vertical beam has holes for mounting pins that provide an articulated coupling of the beam with rotating pins. On one side there are pins flats for holding them against rotation in the aperture of the beam in which they are fixed with the wedge pins. Pivot pin with a flange which is outside the vertical projection 2 is in bushes with cat-s ends are pins. Thus right and left pivot pins, while rotating on pivots, is pivotable in a horizontal plane in two directions. In order to facilitate control wheel turns between the beam and the lower lip of the flange pins are supporting washers.

On the pivot pin are roller bearings, which rotates with the front wheel hub. Inner bearing rings seated on the stud neck and the outer - pressed into the socket wheel. Bearings regulated bolts, lockable via a lock ring, washer and the self-locking nut. Inside the hub to a flange mounted brake drum. On the outer flange hubs have holes for press studs, on which are placed discs guide wheels.

Spare parts and components for the bridge ZIL wholesale and retail online store of spare parts for tractors, combines , special equipment Motor-Agro ✈ delivery in Ukraine in any city ☎ call

Filter by
Manufacturers
more... less
Filter
Contacts in Ukraine

Ukraine, Kharkiv, Autogenna, 12a

from 830 to 1700 GMT+3

sbyt@motor-agro.com.ua

+38 050 300 00 19

+38 067 572 17 11

+38 057 714 65 14


Didn't find the necessary spare part for your tractor, combine harvester, special machinery or equipment?

Just call MOTOR-AGRO specialists at the numbers listed on this site - we will help

Product added to compare.