Poluramy front axle, steering

Spare poluramy, the front axle, the steering tractors UMZ-6

bolts, shafts, rollers, bushings, nuts, hydraulic equipment, hydraulic cylinders, GUR, Cardan shafts, wedges, toothed wheels, steering columns, rings O, brackets, lids, side members, nozzles, clamps, shafts, heaters, fingers, the half-frames, repair kits, levers, gaskets, sectors, bipods, glasses, hub brake, pipes, rods, sealers, clamps, pins, worms, washer...


ᐉ Poluramy front axle, steering from Motor-Agro

replacements poluramy front axle steering system for a tractor UMZ-6

is a swinging front axle molded tubular beam with the split ends. Through the tides beams connected through the pivot axis with the lugs on the front bar of the core. By axial displacement and being rotated swing axle locking bolt located on the front bar. At both ends of the beams are retractable fists comprising bracket tubes welded together. In the tube 6 there are holes for snap-step 50mm. All fist position coincide with various ruts idler assemblies.

on the knuckle bracket on the sliding ball bearing and a 2-pin bushings mounted turning together with an embedded semi-axis of the front wheel. Bearing cavity and bottom bushings are sealed with rubber rings, and the top rubber ring and gland felt. On the pivot pin at the top of the slots are pivoting arms. The levers articulated manner transverse and fastened through push rods with a central lever fixed to the steering lever. This lever is connected through a longitudinal rod with steering and rotates on two sleeves placed in a flood beam. The length of the push rod and steering adjustable. The angle of rotation of guide wheels aggregates limited angle of rotation of the steering lever resisting cornering axis beams in the tides.

Hinges pushing lugs and transverse rods are made the same. The ball stud joint rotates in the polyamide and rubber inserts. Ear pressed to the head of the adjusting stopper finger. Finger joint longitudinal steering rod is rotated from steel inserts which are pressed spring preload adjusting stopper, to a head of a finger. The springs in the heads are thrust relates. ball studs, so that the forces acting on the rod is transmitted only one spring. Compressing the spring limit by means of the stop, thus ensuring its protection from damage during severe shock.

poluramy UMZ tractor UMZ-6

is represented by two channel bars, fastened together with the front bar . Ahead diesel D-65 is mounted on the timber poluramy pivot bearing and rear - through a flywheel casing is connected to the clutch housing

Steering (RC) of the tractor UMZ-6

Comprising the steering mechanism. a hydraulic booster of the steering wheel column, the longitudinal traction and steering linkage of the front axle.
The steering mechanism is configured as a worm gear interacting with the cylinder and the distributor.

Serviceability steering hydraulic pressure is checked by determining by the pump, and then finding out the causes oil leakage in the distributor and the power cylinder and will prevent adjusted. valve.

Filter by

Manufacturers

more... less

Price

грн грн
Filter
Contacts in Ukraine

Ukraine, Kharkiv, Autogenna, 12a

from 830 to 1700 GMT+3

sbyt@motor-agro.com.ua

+38 050 300 00 19

+38 067 572 17 11

+38 057 714 65 14

Мотор-Агро Viber Contact Мотор-Агро Viber Contact


Didn't find the necessary spare part for your tractor, combine harvester, special machinery or equipment?

Just call MOTOR-AGRO specialists at the numbers listed on this site - we will help

Product added to compare.