CONSULTATION AND ORDER
Mon - Fri from 830 until 1700 GMT+3
Bolts, shafts, bolts, bushings, nuts, sleeves, key pairs, the main transmission sumps, discs, wedges, rings, housings, brackets, caps, bridges, clamps, shafts, rails, a half-gasket promopory, springs, gear, lever, satellites, glasses, pipes, flanges, plates, washers, hinges, gears, pins. ..
Difference MTZ 82 of MTZ -80 is the set of the first front axle and additional components of its drive, namely the transfer case, front and intermediate propeller shafts, intermediate support with a plow steering, safety clutch and steering rod tube.
The drive on the front axle MTZ-82 is fed through a manual that provides a synchronous speed of the front and rear pairs of wheels on all envisaged programs. Transfer box is attached to the gearbox housing on the right while the tractor is moving. On the clutch housing bottom clutch joins intermediate support propeller shafts. The front axle is attached to the beam by means of two hollow axles that enables the bridge to swing in a plane transverse to the wheels in the pair.
design provides a means of screw mechanisms stepless change ruts of the front and rear wheels in a range between 1200-1800 mm. Tires of the front wheels are size 8.3/8-20, Rear 13,612-38, as an option you can set the rear wheels, but only 9,5/9-42.
Ukraine, Kharkiv, Autogenna, 12a
from 830 to 1700 GMT+3
Just call MOTOR-AGRO specialists at the numbers listed on this site - we will help