Tilt camera

Parts for feeder housing for a harvester NIVA

Bitter foster, conveyor shafts, sprockets, levers, hubs, pulleys...


ᐉ Tilt camera from Motor-Agro .

Parts feederhouse harvester NIWA

Inclined camera needed immediately for transporting grain mass from the header to the thresher

Inclined harvester chamber consists of:

  • housing with tsepochnoplanchatym conveyor floating type
  • the top shaft
  • the lower shaft, a spring-loaded in the longitudinal and vertical directions, thus creating conditions for a uniform supply of grain mass in the thresher

For normal operation of the conveyor need to adjust the tension of his chains and the gap between the bars and the bottom of the housing. To avoid loss of grain through the gap at the connection with the feeder thresher housing are sealing belts. Upper and lower cost for threshing, and the side on the feeder housing. In place proleganiya belts no gaps are not allowed. Maize is equipped with normal and adjustable dividers necessary to separate the stems before they are chamfered.

Filter by
Manufacturers
more... less
Filter
Contacts in Ukraine

Ukraine, Kharkiv, Autogenna, 12a

from 830 to 1700 GMT+3

sbyt@motor-agro.com.ua

+38 050 300 00 19

+38 067 572 17 11

+38 057 714 65 14


Didn't find the necessary spare part for your tractor, combine harvester, special machinery or equipment?

Just call MOTOR-AGRO specialists at the numbers listed on this site - we will help

Product added to compare.