Frame, suspension, transmission
Spare frame, suspension, transmission of a tractor T-70
Drums, bolts, shafts, rollers, bushings, nuts, GUR, wheels, rollers, wheels, rings, housings, brackets, the cover tape , spars, strips, shafts, pins, pendants, gaskets, springs, anthers, bracing rollers, levers, clamps, glasses, hubs, tracks, pipes, rods, packing, clutches, running, clips, washers, rods, gears, hoses , stocks...
Disc cover differential driven t-70
Spring seal roller t-70
Bushing t-lever 70 with a shoulder
The finger tracks a narrow t-70
Ring roller with a flattened t-70
The bracket retaining t-70
Parts frame, suspension and transmission for a tractor T-70
T-70 The frame includes a half-frame, which is manufactured using a 2-spars, which are connected with each other by the front beam and GMR housing and PPC housings, the rear axle and the final drive housing. The front and rear parts of it podressorivaetsya with four circular transversely extending torsion bars (2 pcs. In the front and the rear).
T-70 suspension consists of front and rear pipes levers hinges and elastic elements. Elastic elements audio other than the round tubes installed in torsion. On both sides of the rear axle housing is a pair of final drive. Both are in the form of 2-hstupenchatyh gearboxes with steps in separate housings.
Chassis includes crawler tracks supporting rollers, and the leading guide wheels, caterpillar chains directly suspension itself.