PPC and transfer case ZIL

Parts box Variable Transmission (CPT) and the transfer case (RC) ZIL-130

Blocks gears, shafts, transmission assembly, brackets, caps, axles, gears, gaskets, repair kits, gaskets, synchronizers, cables, gears, rods...


ᐉ PPC and transfer case ZIL from Motor-Agro

Spare parts for CAT and the Republic of Kazakhstan for ZIL

Box variable transmissions ZIL

PPC ZIL equipped with a mechanical 3-way transmission with 5 stages (5 forward gears, 1 - back). In the box are 2 synchro inertial type, necessary to enable the second, third, fourth and fifth gears. The housing is installed on the input shaft bearings (aka master) formed with the helical gear and the toothing to fit to include a fifth direct transmission. The bore of the shaft give cylindrical roller bearing, which rests on the secondary shaft. Bottom housing has an intermediate shaft with an installed rigid way on her spur pinion, which is constantly meshed with mainshaft gear and helical gear 2nd, 3rd, 4th gears. Also, the shaft has a pinion with straight teeth for reversing and transferring the first. Splined output shaft should spur gear-carriage to include first transmission and reverse, and the carriage gear synchronizers. The secondary shaft has a pinion which are not fixed rigidly to enable the 2nd, 3rd, 4th gear is in constant mesh with countershaft gears. Bottom Tide housing rigidly standing axis on which the cylindrical roller bearings of the gear unit should reverse. Most of his gear is permanently engaged with the gear of the intermediate shaft. The cavity inside the casing is filled with liquid oil for transmission and close the lid, inside which there is a mechanism of gear changes, similar to GAZ-53A.

Transfer box on ZIL

ZIL-131 is equipped with 2-way transfer box, which has two output shafts, which rotate on ball bearings and cylindrical roller bearings. The advantages of these bearings include that they do not need to be adjusted as in assembly time, and during vehicle use, as required by the conical. Roller Bearings in razdatke ZIL-157K. Both devices are equipped with anti-razdatki Sleep transmission. The transfer box Zil-157K, such a device is on the drive shaft and the drive shaft of the front axle in the form of splines, with different thickness and which form a ledge which abuts with the clutch carriage when Timer. At the ZIL-157K set one-way 2-stage razdatku three-shaft output, which turn on tapered roller bearings.

Spare parts and parts for the gearbox and transfer box ZIL wholesale and retail online store of spare parts for tractors, combines, construction machinery Motor-Agro ✈ delivery in Ukraine in any city ☎ call

Filter by
Manufacturers
more... less
Filter
Contacts in Ukraine

Ukraine, Kharkiv, Autogenna, 12a

from 830 to 1700 GMT+3

sbyt@motor-agro.com.ua

+38 050 300 00 19

+38 067 572 17 11

+38 057 714 65 14


Didn't find the necessary spare part for your tractor, combine harvester, special machinery or equipment?

Just call MOTOR-AGRO specialists at the numbers listed on this site - we will help

Product added to compare.