Transmission, bridges and leading steered wheels
Spare Parts at the box Variable Transmission (CPT), the bridges leading and steered wheels for a harvester NIVA
The shafts, fork carrier, nuts, caps bearing housing, tip toes, clutch release bearings, gears, rods .. .
Gear H of the secondary shaft. Z 50 1st row and outer row (pcs)
Gear H primary shaft Z 19 1st gear and output (pcs)
Gear unit niwa 2-3y transmission input shaft z17-31
Niwa 2nd gear unit output shaft transmission z17-45
Spare parts for CAT and bridges for combine harvesters Niwa
PPC need to change the torque, speed and direction of movement of the engine from the drive wheels. It includes a housing, a primary, intermediate and secondary shafts are mounted with gears. On the secondary shaft should master. GP gear and the parking brake pulley. At the checkpoint tormozok also have a primary shaft, gear lever locking mechanism and an electric switch incomplete enable transmission. Tormozok needed for a quick stop during gear changes. The locking mechanism eliminates gear shifting with headlights on reminder clutch or their self-termination.
Bridge steered wheels
It is located behind the frame and includes a beam steering knuckles, GC and tie rod. Rotation takes place under the influence of GC is pivotally connected to the right wheel via a lever with his fist.
The bridge of the drive wheels
The torque is transmitted to the drive wheels takes place by means of the Single-variator speed of movement, driven by a block which stands on the shaft bearing housing through the drive shaft, the clutch and the gearbox, differential gears side, thereby forming the axle.