Transmission, bridges and leading steered wheels
Spare Parts at the box Variable Transmission (CPT), the bridges leading and steered wheels for a harvester NIVA
The shafts, fork carrier, nuts, caps bearing housing, tip toes, clutch release bearings, gears, rods .. .
Gear H of the secondary shaft. Z 50 1st row and outer row (pcs)
Gear H primary shaft Z 19 1st gear and output (pcs)
Gear unit niwa 2-3y transmission input shaft z17-31
Niwa 2nd gear unit output shaft transmission z17-45
The tip of the steering hydraulic cylinder control niwa
Spare parts for CAT and bridges for combine harvesters Niwa
PPC need to change the torque, speed and direction of movement of the engine from the drive wheels. It includes a housing, a primary, intermediate and secondary shafts are mounted with gears. On the secondary shaft should master. GP gear and the parking brake pulley. At the checkpoint tormozok also have a primary shaft, gear lever locking mechanism and an electric switch incomplete enable transmission. Tormozok needed for a quick stop during gear changes. The locking mechanism eliminates gear shifting with headlights on reminder clutch or their self-termination.
Bridge steered wheels
It is located behind the frame and includes a beam steering knuckles, GC and tie rod. Rotation takes place under the influence of GC is pivotally connected to the right wheel via a lever with his fist.
The bridge of the drive wheels
The torque is transmitted to the drive wheels takes place by means of the Single-variator speed of movement, driven by a block which stands on the shaft bearing housing through the drive shaft, the clutch and the gearbox, differential gears side, thereby forming the axle.